TPS3123J12DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | MANUAL RESET INPUT; POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Base Part Number | TPS3123J12 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Max Output Current | 0A |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 750mV |
| Operating Supply Current | 14μA |
| Nominal Supply Current | 30μA |
| Power Dissipation | 437mW |
| Max Supply Current | 30μA |
| Adjustable Threshold | NO |
| Quiescent Current | 14μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Max Input Voltage | 3.3V |
| Min Reset Threshold Voltage | 1.04V |
| Max Reset Threshold Voltage | 1.12V |
| Threshold Voltage | 1.08 |
| Undervoltage Threshold | 1.08V |
| Overvoltage Threshold | 1.12V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3123J12DBVT Overview
Power management is mounted through 5 terminals. It is packaged with Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. There are a total of 1 channels on this supervisor, and they are arranged in a series. IC management is packaged as a SC-74A, SOT-753 package. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. During the reflow process, a peak temperature of 260 is specified for the package. The supervisor is always powered by a 1.2V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, it has 5 pins on IC management. Pin count of the power management is 5. There should be a minimum voltage supply (Vsup) of 750mV for this PMIC. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 3.3V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a 14μA supply current present in the power management. There are other features such as MANUAL RESET INPUT; POWER-ON RESET GENERATOR to name a few. A similar IC managements number of the manufacturer can always be found by using TPS3123J12, the base power ics number. Voltage supervisor can work with a supply temperature of 30μA at the most.
TPS3123J12DBVT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 750mV
14μA operating supply current
TPS3123J12DBVT Applications
There are a lot of Texas Instruments TPS3123J12DBVT Voltage Supervisors applications.
- Analog circuit
- Automotive power systems
- Functional modules
- Low voltage/high power - AI, GPU
- Power distribution systems of ICU
- Radio
- Efficient information transmission
- Medical-specific isolation transformer
- Electronics installed in the vehicle
- Electrical fire monitoring system
