TPS3123J18DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | MANUAL RESET INPUT; POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TPS3123J18 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 750mV |
| Operating Supply Current | 14μA |
| Nominal Supply Current | 30μA |
| Power Dissipation | 437mW |
| Max Supply Current | 30μA |
| Adjustable Threshold | NO |
| Quiescent Current | 14μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 1.56V |
| Max Reset Threshold Voltage | 1.68V |
| Threshold Voltage | 1.62 |
| Undervoltage Threshold | 1.62V |
| Overvoltage Threshold | 1.68V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3123J18DBVT Overview
As you can see, this power management is mounted through 5 terminals. Packaged in the form of a Cut Tape (CT), power management is easy to use. In this PMIC, you can find 1 functions for your reference. There are a total of 1 channels on this supervisor, and they are arranged in a series. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. During operation, the power ic is supplied with a voltage of 1.8V. Power ics operate at 1 supply voltages. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 5 pins on power management. 5 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 750mV, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 3.3V volts. Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. For this power management, there is an 14μA volt supply current. In addition, IC management are other features such as [0], to mention only a few. To find similar IC managements from the manufacturer, you can always search by TPS3123J18. A maximum supply temperature of 30μA can be used.
TPS3123J18DBVT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 750mV
14μA operating supply current
TPS3123J18DBVT Applications
There are a lot of Texas Instruments TPS3123J18DBVT Voltage Supervisors applications.
- Leakage current detection
- Magnetic resonance imaging
- Battery-powered equipment
- Detection of phase loss
- Multi-voltage system
- Embedded computing
- Power distribution systems of operating room
- WiFi router
- Set top box
- Computer applications
