TPS3124G15DBVR
| Parameters | |
|---|---|
| Undervoltage Threshold | 1.4V |
| Overvoltage Threshold | 1.45V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Base Part Number | TPS3124G15 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 750mV |
| Operating Supply Current | 14μA |
| Nominal Supply Current | 30μA |
| Power Dissipation | 437mW |
| Max Supply Current | 30μA |
| Adjustable Threshold | NO |
| Quiescent Current | 14μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 1.35V |
| Max Reset Threshold Voltage | 1.45V |
| Threshold Voltage | 1.40 |
TPS3124G15DBVR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Packaging is in the form of a Tape & Reel (TR). To assist you, this IC power includes 1 functions. On this supervisor, there is a series of 1 channels that can be found. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts in a 1.5V-voltage supply. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 5 pins on the board. Power managment ic pin count is 5. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 750mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 3.3V volts. A Surface Mount mounting type is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 14μA volt supply current. Among other features, IC power can be also taken advantage of [0], for instance. You can always use TPS3124G15, the base supervisor number, to search for similar PMICs of the manufacturer. At most, voltage supervisor can operate at a supply temperature of 30μA.
TPS3124G15DBVR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 750mV
14μA operating supply current
TPS3124G15DBVR Applications
There are a lot of Texas Instruments TPS3124G15DBVR Voltage Supervisors applications.
- Battery cars
- Display equipment
- Electric heating appliances
- Smart meter
- Personal computers
- Power distribution systems of ICU
- Utility meter
- Dash board
- Leakage protection
- Power distribution systems of infant care room
