TPS3124G15DBVT
| Parameters | |
|---|---|
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS3124G15 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Max Output Current | 0A |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 750mV |
| Operating Supply Current | 14μA |
| Nominal Supply Current | 22μA |
| Adjustable Threshold | NO |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Max Input Voltage | 3.3V |
| Supply Current-Max (Isup) | 0.03mA |
| Undervoltage Threshold | 1.4V |
| Overvoltage Threshold | 1.45V |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
TPS3124G15DBVT Overview
There are 5 terminals on this power management that allow it to be mounted. A Tape & Reel (TR) package is used to package the power management. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of NOT SPECIFIED for the package during reflow. There is a voltage supply of 1.5V for the PMIC chip, and the chip conducts at that voltage. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. The power management belongs to the Power Management Circuits subcategory. It has a total of 5 pins that are attached to IC management. This power management system has 5 pins. IC management can only work with a supply voltage of 750mV volts. The supply voltage (Vsup) should not exceed 3.3V volts in this IC power. Mounting type Surface Mount is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. For this power management, there is an 14μA volt supply current. Among other features, IC power can be also taken advantage of [0], for instance. A similar IC managements number of the manufacturer can always be found by using TPS3124G15, the base power ics number.
TPS3124G15DBVT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 750mV
14μA operating supply current
TPS3124G15DBVT Applications
There are a lot of Texas Instruments TPS3124G15DBVT Voltage Supervisors applications.
- Detection of phase loss
- Set top box
- Leakage current detection
- Stable power system
- Linux and server computing
- Battery cars
- Rechargeable batteries
- Unattended substation automation
- emergency room
- Digitally controlled LDO regulators circuit
