TPS3124J18DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TPS3124J18 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Max Output Current | 0A |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 750mV |
| Operating Supply Current | 14μA |
| Nominal Supply Current | 30μA |
| Power Dissipation | 437mW |
| Output Current | 3mA |
| Max Supply Current | 30μA |
| Adjustable Threshold | NO |
| Quiescent Current | 14μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Max Input Voltage | 3.3V |
| Min Reset Threshold Voltage | 1.56V |
| Max Reset Threshold Voltage | 1.68V |
| Threshold Voltage | 1.62 |
| Undervoltage Threshold | 1.62V |
| Overvoltage Threshold | 1.68V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3124J18DBVT Overview
There are 5 terminals connected to this power management, which makes it easy to mount. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. IC management is packaged as a SC-74A, SOT-753 package. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 1.8V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount is the one that mounts power management. There is a subcategory called Power Management Circuits for this power management. 5 pins are present in total in this power management. 5 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 750mV. There should be no more than 3.3V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountThe supervisors should be set to the following temperature: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 14μA. There are other features such as POWER-ON RESET GENERATOR to name a few. To find similar IC managements from the manufacturer, you can always search by TPS3124J18. The maximum supply temperature is 30μA.
TPS3124J18DBVT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 750mV
14μA operating supply current
TPS3124J18DBVT Applications
There are a lot of Texas Instruments TPS3124J18DBVT Voltage Supervisors applications.
- Battery-powered equipment
- Important electronics for automotive protection
- Detection of phase sequence
- Refrigeration
- Power communication system
- Solar power charger
- Precision measurement
- Medical-specific isolation transformer
- Set top box
- Leakage current detection
