TPS3125G15DBVT
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | MANUAL RESET INPUT; POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Base Part Number | TPS3125G15 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Max Output Current | 0A |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 750mV |
| Operating Supply Current | 14μA |
| Nominal Supply Current | 25μA |
| Power Dissipation | 437mW |
| Output Current | 3mA |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 14μA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Max Input Voltage | 3.3V |
| Min Reset Threshold Voltage | 1.35V |
| Max Reset Threshold Voltage | 1.45V |
| Threshold Voltage | 1.40 |
| Undervoltage Threshold | 1.4V |
| Overvoltage Threshold | 1.45V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
TPS3125G15DBVT Overview
It is mounted through 5 terminals on the power management. It is packaged with Tape & Reel (TR). Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. IC management is packaged as a SC-74A, SOT-753 package. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 1.5V. In a 1 supply voltage, the PMIC chip conducts. Surface Mount is the one that mounts power management. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 5. 5 pins make up the power management. It is recommended that Vsup should not be less than 750mV for this IC power. This IC power should be powered by no more than 3.3V volts of supply voltage (Vsup). Surface Mount mounting is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 14μA. Additionally, IC management are a variety of features, for example [0], to name a few. It is always advisable to use TPS3125G15, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature is 25μA.
TPS3125G15DBVT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 750mV
14μA operating supply current
TPS3125G15DBVT Applications
There are a lot of Texas Instruments TPS3125G15DBVT Voltage Supervisors applications.
- Magnetic resonance imaging
- Leakage protection
- Efficient information transmission
- Low voltage/high power - AI, GPU
- Medical-specific isolation transformer
- Multi-voltage system
- Household appliances
- Solar power charger
- Refrigeration
- Automotive power systems
