TPS3125J12DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | MANUAL RESET INPUT; POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Base Part Number | TPS3125J12 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Max Output Current | 0A |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 750mV |
| Operating Supply Current | 14μA |
| Nominal Supply Current | 25μA |
| Power Dissipation | 437mW |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 14μA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Max Input Voltage | 3.3V |
| Min Reset Threshold Voltage | 1.04V |
| Max Reset Threshold Voltage | 1.12V |
| Threshold Voltage | 1.08 |
| Undervoltage Threshold | 1.08V |
| Overvoltage Threshold | 1.12V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3125J12DBVT Overview
There are 5 terminals connected to this power management, which makes it easy to mount. Power management is packaged in a Tape & Reel (TR) way. In this PMIC, you can find 1 functions for your reference. Power management consists of 1 channels, each of which can be used independently. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. IC management conducts in a 1.2V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. This power ic can be sub-categorized as Power Management Circuits. In total, it has 5 pins on IC management. The pins of the power management system count 5. A voltage (Vsup) that doesn't fall below 750mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) in this PMIC should not exceed 3.3V volts. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The supply current of the power management is 14μA. The other features include, for example, [0], which is just one example. It is always advisable to use TPS3125J12, the base supervisor number, when searching for similar PMICs from the manufacturer. Voltage supervisor can work with a supply temperature of 25μA at the most.
TPS3125J12DBVT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 750mV
14μA operating supply current
TPS3125J12DBVT Applications
There are a lot of Texas Instruments TPS3125J12DBVT Voltage Supervisors applications.
- Battery-powered equipment
- Utility meter
- Computer applications
- Electric heating appliances
- Leakage protection
- Urban rail transit weak current power monitoring
- Insulation fault location system
- Analog circuit
- Automotive power systems
- Data storage applications
