TPS3125L30DBVRG4
| Parameters | |
|---|---|
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | MANUAL RESET INPUT; POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TPS3125L30 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Power Supplies | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 750mV |
| Operating Supply Current | 14μA |
| Nominal Supply Current | 25μA |
| Power Dissipation | 437mW |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 14μA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 2.57V |
| Max Reset Threshold Voltage | 2.71V |
| Threshold Voltage | 2.64 |
| Undervoltage Threshold | 2.64V |
| Overvoltage Threshold | 2.71V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
TPS3125L30DBVRG4 Overview
A total of 5 terminals are used to mount this power management. Power management is packaged in a Tape & Reel (TR) way. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 3V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 5 pins that are attached to IC management. This power management system has 5 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 750mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 3.3V volts. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. It is estimated that the voltage supervisor's supply current is 14μA. In addition, IC management are other features such as [0], to mention only a few. It is always advisable to use TPS3125L30, the base supervisor number, when searching for similar PMICs from the manufacturer. In order to operate this power management, it requires 3V volts of power. A maximum supply temperature of 25μA can be used.
TPS3125L30DBVRG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 750mV
14μA operating supply current
TPS3125L30DBVRG4 Applications
There are a lot of Texas Instruments TPS3125L30DBVRG4 Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Fire equipment power monitoring system
- Solar power charger
- Detection of phase sequence
- Medical-specific isolation transformer
- Power distribution systems of operating room
- Military communications
- Linux and server computing
- Unattended substation automation
- External alarm
