TPS3125L30DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | MANUAL RESET INPUT; POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TPS3125L30 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Max Output Current | 0A |
| Power Supplies | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 750mV |
| Operating Supply Current | 14μA |
| Nominal Supply Current | 25μA |
| Power Dissipation | 437mW |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 14μA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Max Input Voltage | 3.3V |
| Min Reset Threshold Voltage | 2.57V |
| Max Reset Threshold Voltage | 2.71V |
| Threshold Voltage | 2.64 |
| Undervoltage Threshold | 2.64V |
| Overvoltage Threshold | 2.71V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3125L30DBVT Overview
Power management is mounted through 5 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. There is a specification for the peak reflow temperature of the package to be 260. During operation, the power ic is supplied with a voltage of 3V. IC management conducts in a 1-voltage supply. The mount is provided by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. The total number of pins on this power management is 5. There are 5 pins on the power managment ic. Supply voltage (Vsup) should be at least 750mV for this power management. Voltage (Vsup) shouldn't exceed 3.3V volts in this PMIC. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a 14μA supply current present in the power management. Additionally, IC management are a variety of features, for example [0], to name a few. To find similar IC managements from the manufacturer, you can always search by TPS3125L30. This power management requires 3V power to work. A maximum supply temperature of 25μA can be used with this power management.
TPS3125L30DBVT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 750mV
14μA operating supply current
TPS3125L30DBVT Applications
There are a lot of Texas Instruments TPS3125L30DBVT Voltage Supervisors applications.
- Multi-voltage system
- Electric heating appliances
- WiFi router
- Computer applications
- DC stabilized power supply module
- Satellite navigation
- Detection of phase imbalance
- Medical-specific insulation monitor
- Important electronics for automotive protection
- Solar power charger
