TPS3305-18DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3305 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 725mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 1.68V 2.93V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | 1.68 |
| Undervoltage Threshold | 2.93V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3305-18DG4 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Packaged in the form of a Tube, power management is easy to use. In this IC power you will find 1 functions for you to refer to. There are 2 channels on this power managment ic that can be found in a series. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. IC management conducts at a voltage of 3.3V. Power ics operate at 2 supply voltages. The power management belongs to the Power Management Circuits subcategory. There are a total of 8 pins on power management. This power management system has 8 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.7V. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. A Surface Mount mounting type is recommended. We recommend setting the supervisors to -40°C~85°C TJ degrees. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. There is a 15μA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by TPS3305. A maximum supply temperature of 40μA can be used with this power management.
TPS3305-18DG4 Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
15μA operating supply current
TPS3305-18DG4 Applications
There are a lot of Texas Instruments TPS3305-18DG4 Voltage Supervisors applications.
- Efficient information transmission
- Computer applications
- Electrical fire monitoring system
- Low voltage/high power - AI, GPU
- Stable power system
- Leakage protection
- Smart meter
- Multi-voltage system
- Solar power charger
- Magnetic resonance imaging
