banner_page

TPS3305-18DGNG4

3.3V8 Terminals 8-Pin TPS3305 Voltage supervisor2 Channels Min 2.7V Max 6V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS3305-18DGNG4
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
  • Datasheet: PDF
  • Stock: 478
  • Description: 3.3V8 Terminals 8-Pin TPS3305 Voltage supervisor2 Channels Min 2.7V Max 6V (Kg)

Details

Tags

Parameters
Pin Count 8
Number of Channels 2
Max Supply Voltage 6V
Min Supply Voltage 2.7V
Operating Supply Current 15μA
Nominal Supply Current 40μA
Power Dissipation 2.14W
Max Supply Current 40μA
Adjustable Threshold NO
Quiescent Current 15μA
Watchdog Timer Yes
Reset Active High/Active Low
Voltage - Threshold 1.68V 2.93V
Number of Voltages Monitored 2
Reset Timeout 140ms Minimum
Threshold Voltage 1.68
Undervoltage Threshold 2.93V
Height 1.1mm
Length 3mm
Width 3mm
Thickness 1.02mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~85°C TJ
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Multi-Voltage Supervisor
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Power Management Circuits
Max Power Dissipation 2.14W
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Base Part Number TPS3305
Output Push-Pull, Totem Pole

TPS3305-18DGNG4 Overview


Power management is mounted through 8 terminals. It is packaged with Tube. Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 2 channels. The purpose of this IC power is to provide you with a reference of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad functions. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 3.3V supply voltage, the power management conducts. During operation, the power ic is supplied with a voltage of 2. This power ic can be sub-categorized as Power Management Circuits. A total of 8 pins are located on this power management. 8 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.7V. The supply voltage (Vsup) should not exceed 6V volts in this IC power. A Surface Mount mounting type is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TJ. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 15μA is the recommended value. You can always use TPS3305, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature that PMIC chip can work with is 40μA.

TPS3305-18DGNG4 Features


Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
15μA operating supply current

TPS3305-18DGNG4 Applications


There are a lot of Texas Instruments TPS3305-18DGNG4 Voltage Supervisors applications.

  • Leakage protection
  • Power distribution systems of CCU
  • Data storage applications
  • Radio
  • Multi-voltage system
  • FPGA design
  • Personal computers
  • DVR
  • Smartphones
  • Computer applications

Write a review

Note: HTML is not translated!
    Bad           Good