TPS3305-18DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3305 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 725mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 1.68V 2.93V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | 1.68 |
| Undervoltage Threshold | 2.93V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3305-18DRG4 Overview
A total of 8 terminals are used to mount this power management. A Tape & Reel (TR) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. There are 2 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. According to the specification, the package's peak reflow temperature is specified to be 260. The supervisor is always powered by a 3.3V volt supply. Power ics operate at 2 supply voltages. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 8 pins on IC management. Power managment ic pin count is 8. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.7V. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended that the supervisor be set to this temperature: -40°C~85°C TJ. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. In order to maintain a stable supply current for the power management, 15μA is the recommended value. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3305, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 40μA.
TPS3305-18DRG4 Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
15μA operating supply current
TPS3305-18DRG4 Applications
There are a lot of Texas Instruments TPS3305-18DRG4 Voltage Supervisors applications.
- DVR
- Detection of phase sequence
- Urban rail transit weak current power monitoring
- Military electronics
- Personal computers
- Precision measurement
- Electrical fire monitoring system
- Transformer load monitoring equipment
- Display equipment
- Consumer electronics
