TPS3305-25D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3305 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 725mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.25V 2.93V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | 2.25 |
| Undervoltage Threshold | 2.93V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3305-25D Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. It is packaged with Tube. In this PMIC, you can find 1 functions for your reference. There are 2 channels on this power managment ic that can be found in a series. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Manage ics operate at 3.3V supply voltages. When a supply voltage of 2 is applied to the power ic, it conducts. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 8 pins that are attached to IC management. Power managment ic pin count is 8. IC management can only work with a supply voltage of 2.7V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~85°C TJ degrees. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3305, which is the base power ics number. Voltage supervisor can work with a supply temperature of 40μA at the most.
TPS3305-25D Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
15μA operating supply current
TPS3305-25D Applications
There are a lot of Texas Instruments TPS3305-25D Voltage Supervisors applications.
- DC stabilized power supply module
- Power distribution systems of ICU
- emergency room
- Smartphones
- Battery-powered equipment
- Digitally controlled LDO regulators circuit
- Military communications
- Embedded computing
- Electrical fire monitoring system
- Dash board
