TPS3305-25DGN
| Parameters | |
|---|---|
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.25V 2.93V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | 2.25 |
| Undervoltage Threshold | 2.93V |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3305 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 2.14W |
TPS3305-25DGN Overview
This power management consists of 8 mounting terminals on which it can be mounted. Packaging is in the form of a Tube. In this IC power you will find 1 functions for you to refer to. There are a total of 2 channels on this supervisor, and they are arranged in a series. There are 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts at a voltage of 3.3V. IC management conducts in a 2-voltage supply. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 8 pins in it. Pin count of the power management is 8. There should be a minimum voltage supply (Vsup) of 2.7V for this PMIC. There should be no more than 6V volts of maximum supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TJ. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The supply current of the power management is 15μA. To find similar IC managements from the manufacturer, you can always search by TPS3305. A maximum supply temperature of 40μA can be used.
TPS3305-25DGN Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
15μA operating supply current
TPS3305-25DGN Applications
There are a lot of Texas Instruments TPS3305-25DGN Voltage Supervisors applications.
- Electronics installed in the vehicle
- Stable power system
- Low voltage/high power - AI, GPU
- FPGA design
- Electrical fire monitoring system
- Power distribution systems of operating room
- Battery cars
- emergency room
- Medical-specific isolation transformer
- Computer applications
