TPS3305-25DGNG4
| Parameters | |
|---|---|
| Package / Case | HTSSOP EP |
| Surface Mount | YES |
| Number of Pins | 8 |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Number of Elements | 2 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Power Dissipation-Max | 2.14W |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 2.14W |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.25V |
| Reset Timeout | 140 ms |
| Undervoltage Threshold | 2.93V |
| Height Seated (Max) | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS3305-25DGNG4 Overview
It is mounted through 8 terminals on the power management. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 2 channels. The purpose of this IC power is to provide you with a reference of HTSSOP EP functions. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 8 pins on the board. The pins of the power management system count 8. Supply voltage (Vsup) should be at least 2.7V for this power management. There should be no more than 6V volts of maximum supply voltage (Vsup) in this power management. The supply current of the power management is 15μA. This supervisor includes other kinds of integrated circuits, such as POWER SUPPLY MANAGEMENT CIRCUIT as well as other kinds. At the most, voltage supervisor can work with a supply temperature of 40μA. The power management system contains 2 elements and has been extensively applied in various target applications.
TPS3305-25DGNG4 Features
Minimum supply voltage of 2.7V
15μA operating supply current
TPS3305-25DGNG4 Applications
There are a lot of Texas Instruments TPS3305-25DGNG4 Voltage Supervisors applications.
- Microprocessor system
- Battery cars
- Digitally controlled LDO regulators circuit
- Smart meter
- Embedded computing
- Precision measurement
- Consumer electronics
- Transformer load monitoring equipment
- Rechargeable batteries
- Power distribution systems of infant care room
