TPS3305-25DGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3305 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 2.14W |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.25V 2.93V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | 2.25 |
| Undervoltage Threshold | 2.93V |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3305-25DGNR Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. This power ic is packaged in a way that looks like a Tape & Reel (TR). To assist you, this IC power includes 1 functions. This power management is made up of 2 channels which are available in a series format. IC management is packaged as a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts in a 3.3V-voltage supply. Power ics operate at 2 supply voltages. There is a subcategory of this power ic known as Power Management Circuits. Taking into account all of the pins, this power management has a total of 8. There are 8 pins on the power managment ic. A voltage (Vsup) that doesn't fall below 2.7V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 6V volts of supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TJ. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 15μA. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3305, which is the base power ics number. The voltage supervisor requires a power source of 3/5V volts in order to work correctly. A maximum supply temperature of 40μA can be used.
TPS3305-25DGNR Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
15μA operating supply current
TPS3305-25DGNR Applications
There are a lot of Texas Instruments TPS3305-25DGNR Voltage Supervisors applications.
- DSP
- Battery-powered equipment
- Power distribution systems of CCU
- Power distribution systems of operating room
- Household appliances
- Insulation fault location system
- Analog circuit
- Important electronics for automotive safety
- Rechargeable batteries
- Electrical fire monitoring system
