TPS3305-33DGN
| Parameters | |
|---|---|
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD IS 4.55V, POWER ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3305 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 2.14W |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.93V 4.55V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | 2.93 |
| Undervoltage Threshold | 4.55V |
TPS3305-33DGN Overview
There are 8 terminals on this power management that allow it to be mounted. Packaged in a Tube-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 2 channels, each of which can be used independently. Please refer to power management for 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad functions. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 5V is applied to the power ic, it conducts. Power management conducts at a voltage of 2. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. There are 8 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 2.7V for this PMIC. There should be no more than 6V volts of supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TJ. Power management has an output of Push-Pull, Totem Pole during operation. It is estimated that the voltage supervisor's supply current is 15μA. The other features include, for example, [0], which is just one example. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3305, which is the base power ics number. At the most, voltage supervisor can work with a supply temperature of 40μA.
TPS3305-33DGN Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
15μA operating supply current
TPS3305-33DGN Applications
There are a lot of Texas Instruments TPS3305-33DGN Voltage Supervisors applications.
- DC stabilized power supply module
- Power communication system
- Automotive power systems
- Battery-powered equipment
- Multi-voltage system
- Insulation fault location system
- Refrigeration
- Smart meter
- emergency room
- Cloud computing
