TPS3305-33DGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD IS 4.55V, POWER ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3305 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 2.14W |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.93V 4.55V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | 2.93 |
| Undervoltage Threshold | 4.55V |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3305-33DGNR Overview
A total of 8 terminals are used to mount this power management. Tape & Reel (TR)-packaging is used. In this PMIC, you can find 1 functions for your reference. There are 2 channels on this power managment ic that can be found in a series. IC management is packaged as a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 5V is applied to the power ic, it conducts. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 8 pins that are attached to IC management. 8 pins make up the power management. A voltage (Vsup) that doesn't fall below 2.7V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6V volts. The recommended mounting type for IC management is Surface Mount. You should set the supervisor's temperature during -40°C~85°C TJ . As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. There are also other features in the software such as [0], just to mention a few. For similar manage ics search of the manufacturer, you can always refer to TPS3305, the base PMIC number. To be able to work, this power management requires 3/5V volts of power. Voltage supervisor can work with a supply temperature of 40μA at the most.
TPS3305-33DGNR Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
15μA operating supply current
TPS3305-33DGNR Applications
There are a lot of Texas Instruments TPS3305-33DGNR Voltage Supervisors applications.
- Satellite navigation
- Electrical fire monitoring system
- Set top box
- Power distribution systems of infant care room
- Power distribution systems of CCU
- DC stabilized power supply module
- Dash board
- Fire equipment power monitoring system
- Detection of phase sequence
- Military communications
