Parameters |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Current Rating |
40A |
Base Part Number |
TPS3306 |
Output |
Open Drain or Open Collector |
Pin Count |
8 |
Output Voltage |
2.93V |
Power Supplies |
3/5V |
Number of Channels |
2 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2.7V |
Operating Supply Current |
15μA |
Nominal Supply Current |
40μA |
Power Dissipation |
725mW |
Max Supply Current |
40μA |
Adjustable Threshold |
NO |
Quiescent Current |
15μA |
Watchdog Timer |
Yes |
Reset |
Active Low |
Voltage - Threshold |
1.4V 2.93V |
Number of Voltages Monitored |
2 |
Reset Timeout |
70ms Minimum |
Threshold Voltage |
+2.931.4V |
Undervoltage Threshold |
2.93V |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Type |
Multi-Voltage Supervisor |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
POWER-ON RESET GENERATOR |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
725mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
TPS3306-15D Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaged in the form of a Tube, power management is easy to use. Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 2 channels. As a reference, this IC power includes 8-SOIC (0.154, 3.90mm Width) functions for your convenience. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. IC management conducts at a voltage of 3.3V. In a 2 supply voltage, the PMIC chip conducts. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 8 pins that are attached to IC management. There are 8 pins on the power managment ic. A voltage (Vsup) that doesn't fall below 2.7V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 6V volts of maximum supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. There is a supply current of 15μA for the power management. In addition, IC management are other features such as [0], to mention only a few. A similar IC managements number of the manufacturer can always be found by using TPS3306, the base power ics number. The voltage supervisor requires a power source of 3/5V volts in order to work correctly. Voltage supervisor can work with a supply temperature of 40μA at the most. There is a current rating of 40A for this IC management.
TPS3306-15D Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
15μA operating supply current
Current rating of 40A
TPS3306-15D Applications
There are a lot of Texas Instruments TPS3306-15D Voltage Supervisors applications.
- Precision measurement
- emergency room
- Kitchen appliances
- Important electronics for automotive protection
- Magnetic resonance imaging
- Stable power system
- Automotive permanent magnet synchronous motors
- Sensitive sensors
- Leakage current detection
- Low voltage/high power - AI, GPU