TPS3306-18DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3306 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 725mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 1.68V 2.93V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 70ms Minimum |
| Threshold Voltage | +2.931.68V |
| Undervoltage Threshold | 2.93V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3306-18DG4 Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in the form of a Tube, power management is easy to use. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 2 channels that can be found. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. IC management is specified that the package peak reflow temperature should be 260. In a 3.3V supply voltage, the power management conducts. When a supply voltage of 2 is applied to the power ic, it conducts. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 8 pins in it. Pin count of the power management is 8. Supply voltage (Vsup) should be at least 2.7V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. In order to maintain a stable supply current for the power management, 15μA is the recommended value. Additionally, there are many other features that can be found inside of the power management, such as [0]. For similar manage ics search of the manufacturer, you can always refer to TPS3306, the base PMIC number. In order to operate this power management, it requires 3/5V volts of power. The maximum supply temperature voltage supervisor can handle is 40μA.
TPS3306-18DG4 Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
15μA operating supply current
TPS3306-18DG4 Applications
There are a lot of Texas Instruments TPS3306-18DG4 Voltage Supervisors applications.
- Functional modules
- emergency room
- Radar
- Electronics installed in the vehicle
- Refrigeration
- Important electronics for automotive protection
- Low voltage/high power - AI, GPU
- DVR
- Solar power charger
- Network equipment
