Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Multi-Voltage Supervisor |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
POWER-ON RESET GENERATOR |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
424mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Base Part Number |
TPS3306 |
Output |
Open Drain or Open Collector |
Pin Count |
8 |
Power Supplies |
3/5V |
Number of Channels |
2 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2.7V |
Operating Supply Current |
15μA |
Nominal Supply Current |
40μA |
Power Dissipation |
424mW |
Max Supply Current |
40μA |
Adjustable Threshold |
NO |
Quiescent Current |
15μA |
Watchdog Timer |
Yes |
Reset |
Active Low |
Voltage - Threshold |
1.68V 2.93V |
Number of Voltages Monitored |
2 |
Reset Timeout |
70ms Minimum |
Threshold Voltage |
+2.931.68V |
Undervoltage Threshold |
2.93V |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS3306-18DGK Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. There is a Tube-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. This power management is made up of 2 channels which are available in a series format. There are 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions included in this PMIC so that you can refer to them. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 3.3V-voltage supply. Power management conducts at a voltage of 2. The power management belongs to the Power Management Circuits subcategory. In total, it has 8 pins on IC management. 8 pins are on the supervisor. It is recommended that Vsup should not be less than 2.7V for this IC power. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -40°C~85°C TA . When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. Among other features, IC power can be also taken advantage of [0], for instance. It is always advisable to use TPS3306, the base supervisor number, when searching for similar PMICs from the manufacturer. It requires 3/5V watts of power to operate this voltage supervisor. The power management can work with a maximum supply temperature of 40μA.
TPS3306-18DGK Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
15μA operating supply current
TPS3306-18DGK Applications
There are a lot of Texas Instruments TPS3306-18DGK Voltage Supervisors applications.
- Fire equipment power monitoring system
- Computer applications
- Military electronics
- Set top box
- Linux and server computing
- Personal computers
- Digitally controlled LDO regulators circuit
- Dash board
- Important electronics for automotive protection
- Electrical fire monitoring system