TPS3306-18DGKRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 424mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3306 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 424mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 1.68V 2.93V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 70ms Minimum |
| Threshold Voltage | +2.931.68V |
| Undervoltage Threshold | 2.93V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3306-18DGKRG4 Overview
Power management is mounted through 8 terminals. It is packaged with Tape & Reel (TR). To assist you, this IC power includes 1 functions. There are 2 channels available on this supervisor, and each channel has a different function. Please refer to power management for 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3.3V volt supply. Power ics operate at 2 supply voltages. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 8 pins in it. This power management has 8 pins. Supply voltage (Vsup) should be at least 2.7V for this power management. This IC power should be powered by no more than 6V volts of supply voltage (Vsup). Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. There is a supply current of 15μA for the power management. Supervisors are also additional features, such as [0] for example, which are worth mentioning. To find similar IC managements from the manufacturer, you can always search by TPS3306. A power supply of 3/5V watts is required for the operation of this power management. Voltage supervisor can work with a supply temperature of 40μA at the most.
TPS3306-18DGKRG4 Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
15μA operating supply current
TPS3306-18DGKRG4 Applications
There are a lot of Texas Instruments TPS3306-18DGKRG4 Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Military communications
- Dash board
- WiFi router
- Insulation fault location system
- Medical-specific isolation transformer
- Leakage protection
- Electronics installed in the vehicle
- Power distribution systems of infant care room
- Electric heating appliances
