TPS3306-18QDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3306 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 725mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 1.68V 2.93V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 70ms Minimum |
| Threshold Voltage | +2.931.68V |
| Undervoltage Threshold | 2.93V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3306-18QDRQ1 Overview
There are 8 terminals on this power management that allow it to be mounted. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. There are a total of 2 channels on this supervisor, and they are arranged in a series. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 3.3V is used to conduct the PMIC chip. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. There is a subcategory of this power ic known as Power Management Circuits. The total number of pins on this power management is 8. 8 pins are present on the power management system. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2.7V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6V volts. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. During operation, this power management system outputs Open Drain or Open Collector. The power management's supply current is 15μA. It is always advisable to use TPS3306, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 3/5V volts of power in order for this voltage supervisor to operate. A maximum supply temperature of 40μA can be used. As you may know, this PMIC comes from the well-known Automotive, AEC-Q100 series product line.
TPS3306-18QDRQ1 Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
15μA operating supply current
TPS3306-18QDRQ1 Applications
There are a lot of Texas Instruments TPS3306-18QDRQ1 Voltage Supervisors applications.
- Magnetic resonance imaging
- Automotive permanent magnet synchronous motors
- Detection of phase imbalance
- Power communication system
- Electric heating appliances
- Smartphones
- Refrigeration
- Personal computers
- Consumer electronics
- Microcontroller system
