TPS3306-20QDRG4Q1
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS3306 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 40μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 725mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 1.85V 2.92V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 70ms Minimum |
| Threshold Voltage | +2.931.85V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
TPS3306-20QDRG4Q1 Overview
It is mounted through 8 terminals on the power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. The purpose of this IC management is to provide you with a reference of 1 functions. There are a total of 2 channels on this supervisor, and they are arranged in a series. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. According to the specification, the package's peak reflow temperature is specified to be 260. A supply voltage of 3.3V is used to conduct the PMIC chip. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. 8 pins are present in total in this power management. 8 pins make up the power management. It is recommended that Vsup should not be less than 2.7V for this IC power. The supply voltage (Vsup) should not exceed 6V volts in this IC power. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. There is a supply current of 40μA for the power management. For similar manage ics search of the manufacturer, you can always refer to TPS3306, the base PMIC number. The power management must be powered by 3/5V volts to function properly. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 40μA. Located in the well-known Automotive, AEC-Q100 series product line, this IC management is a kind of this series.
TPS3306-20QDRG4Q1 Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
40μA operating supply current
TPS3306-20QDRG4Q1 Applications
There are a lot of Texas Instruments TPS3306-20QDRG4Q1 Voltage Supervisors applications.
- Analog circuit
- Electric heating appliances
- Detection of phase loss
- Microcontroller system
- Medical-specific insulation monitor
- Electronics installed in the vehicle
- Military communications
- Battery cars
- Display equipment
- Personal computers
