TPS3306-25D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3306 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 725mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.25V 2.93V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 70ms Minimum |
| Threshold Voltage | +2.932.25V |
| Undervoltage Threshold | 2.93V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3306-25D Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Tube-packaging is used. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 2 channels that can be found. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. The supervisor is always powered by a 3.3V volt supply. When a supply voltage of 2 is applied to the power ic, it conducts. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 8 pins on power management. The pins of the power management system count 8. IC management can only work with a supply voltage of 2.7V volts. There should be no more than 6V volts of supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supply current of the power management is 15μA. In addition, IC management are other features such as [0], to mention only a few. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3306, which is the base power ics number. It requires 3/5V watts of power to operate this voltage supervisor. The power management can work with a maximum supply temperature of 40μA.
TPS3306-25D Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
15μA operating supply current
TPS3306-25D Applications
There are a lot of Texas Instruments TPS3306-25D Voltage Supervisors applications.
- Sensitive sensors
- Medical-specific isolation transformer
- DVR
- DC stabilized power supply module
- Telecommunications equipment
- WiFi router
- Important electronics for automotive protection
- Smart meter
- Leakage protection
- Stable power system
