TPS3306-25DGK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 424mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3306 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Max Output Current | 5mA |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 424mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.25V 2.93V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 70ms Minimum |
| Threshold Voltage | +2.932.25V |
| Undervoltage Threshold | 2.93V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3306-25DGK Overview
As you can see, this power management is mounted through 8 terminals. It is packaged with Tube. Power management is possible to find a series of 1 functions. This power management is made up of 2 channels which are available in a series format. Please find attached 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. Packages are specified to have an average peak reflow temperature of 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 2. There is a subcategory called Power Management Circuits for this power management. 8 pins are present in total in this power management. The pins of the power management system count 8. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2.7V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. The mounting type of the supervisors is Surface MountIt is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. For this power management, there is an 15μA volt supply current. There are other features such as POWER-ON RESET GENERATOR to name a few. It is always advisable to use TPS3306, the base supervisor number, when searching for similar PMICs from the manufacturer. In order to operate this power management, it requires 3/5V volts of power. The power management can work with a maximum supply temperature of 40μA.
TPS3306-25DGK Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
15μA operating supply current
TPS3306-25DGK Applications
There are a lot of Texas Instruments TPS3306-25DGK Voltage Supervisors applications.
- Medical-specific insulation monitor
- Power distribution systems of CCU
- FPGA design
- Power communication system
- Smartphones
- Cloud computing
- Rechargeable batteries
- WiFi router
- Urban rail transit weak current power monitoring
- Battery cars
