TPS3306-25QDRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS3306 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 40μA |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.25V 2.93V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 70ms Minimum |
| Threshold Voltage | +2.932.25V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3306-25QDRG4Q1 Overview
This power management consists of 8 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 2 channels. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 3.3V-voltage supply. When 2 is applied to the power ic, it conducts. This power ic can be sub-categorized as Power Management Circuits. 8 pins are present in total in this power management. 8 pins are on the supervisor. It is recommended that Vsup should not be less than 2.7V for this IC power. There should be no more than 6V volts of maximum supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. There is a 40μA supply current present in the power management. It is always advisable to use TPS3306, the base supervisor number, when searching for similar PMICs from the manufacturer. To be able to work, this power management requires 3/5V volts of power. A maximum supply temperature of 40μA can be used with this power management. As the name implies, this supervisor is a kind of the famous Automotive, AEC-Q100 series product line.
TPS3306-25QDRG4Q1 Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
40μA operating supply current
TPS3306-25QDRG4Q1 Applications
There are a lot of Texas Instruments TPS3306-25QDRG4Q1 Voltage Supervisors applications.
- Transformer load monitoring equipment
- Sensitive sensors
- emergency room
- Urban rail transit weak current power monitoring
- Smartphones
- DSP
- Military communications
- Multi-voltage system
- Computer applications
- Magnetic resonance imaging
