TPS3306-33D
| Parameters | |
|---|---|
| Reset Timeout | 70ms Minimum |
| Threshold Voltage | +4.552.93V |
| Undervoltage Threshold | 4.55V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3306 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 725mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.93V 4.55V |
| Number of Voltages Monitored | 2 |
TPS3306-33D Overview
As you can see, this power management is mounted through 8 terminals. Packaged in a Tube-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 2 channels, each of which can be used independently. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 3.3V is used to conduct the PMIC chip. Power management conducts at a voltage of 2. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 8 pins in it. This power management system has 8 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2.7V, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~85°C TA degrees. The output voltage of this power managment ic during operation is Open Drain or Open Collector. There is a supply current of 15μA for the power management. In addition, IC management are other features such as [0], to mention only a few. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3306, which is the base power ics number. A power supply of 3/5V watts is required for the operation of this power management. A maximum supply temperature of 40μA can be used with this power management.
TPS3306-33D Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
15μA operating supply current
TPS3306-33D Applications
There are a lot of Texas Instruments TPS3306-33D Voltage Supervisors applications.
- Insulation fault location system
- Electrical fire monitoring system
- Detection of phase sequence
- External alarm
- Telecommunications equipment
- Fire equipment power monitoring system
- Functional modules
- WiFi router
- Set top box
- Smartphones
