Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Multi-Voltage Supervisor |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
POWER-ON RESET GENERATOR |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
424mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Base Part Number |
TPS3306 |
Output |
Open Drain or Open Collector |
Pin Count |
8 |
Power Supplies |
3/5V |
Number of Channels |
2 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2.7V |
Operating Supply Current |
15μA |
Nominal Supply Current |
40μA |
Power Dissipation |
424mW |
Max Supply Current |
40μA |
Adjustable Threshold |
NO |
Quiescent Current |
15μA |
Watchdog Timer |
Yes |
Reset |
Active Low |
Voltage - Threshold |
2.93V 4.55V |
Number of Voltages Monitored |
2 |
Reset Timeout |
70ms Minimum |
Threshold Voltage |
+4.552.93V |
Undervoltage Threshold |
4.55V |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS3306-33DGKR Overview
There are 8 terminals on this power management that allow it to be mounted. Power management is packaged in a Tape & Reel (TR) way. The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 2 channels which are available in a series format. In this PMIC, you can find 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for your reference. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. As specified in the package specification, the peak reflow temperature of the package is set at 260. The supervisor is always powered by a 3.3V volt supply. In a 2 supply voltage, the PMIC chip conducts. This power ic can be sub-categorized as Power Management Circuits. 8 pins are present in total in this power management. There are 8 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.7V. The supply voltage (Vsup) should not exceed 6V volts in this IC power. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. There is a 15μA supply current present in the power management. There are other features such as POWER-ON RESET GENERATOR to name a few. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3306, which is the base power ics number. To operate this power management, you will need at least 3/5V volts of power. The maximum supply temperature is 40μA.
TPS3306-33DGKR Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
15μA operating supply current
TPS3306-33DGKR Applications
There are a lot of Texas Instruments TPS3306-33DGKR Voltage Supervisors applications.
- Medical-specific isolation transformer
- Detection of phase loss
- Dash board
- WiFi router
- FPGA design
- Cloud computing
- Embedded computing
- Telecommunications equipment
- Power distribution systems of ICU
- Personal computers