TPS3306-33QDRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD IS 4.55V, POWER ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3306 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 40μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 725mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.93V 4.55V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 70ms Minimum |
| Threshold Voltage | +4.552.93V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3306-33QDRG4Q1 Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Packaging is in the form of a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. There are a total of 2 channels on this supervisor, and they are arranged in a series. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 3.3V supply voltages. IC management is possible to find a succession of 2 voltages that have been checked. This power ic can be sub-categorized as Power Management Circuits. It has a total of 8 pins that are attached to IC management. 8 pins are present on the power management system. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2.7V. The supply voltage (Vsup) should not exceed 6V volts in this IC power. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. The supply current of the power management is 40μA. Additionally, IC management are a variety of features, for example [0], to name a few. To find similar IC managements from the manufacturer, you can always search by TPS3306. To operate this power management, you will need at least 3/5V volts of power. A maximum supply temperature of 40μA can be used. The IC power that you are looking at comes from our well-known Automotive, AEC-Q100 series product line.
TPS3306-33QDRG4Q1 Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
40μA operating supply current
TPS3306-33QDRG4Q1 Applications
There are a lot of Texas Instruments TPS3306-33QDRG4Q1 Voltage Supervisors applications.
- Consumer electronics
- Digitally controlled LDO regulators circuit
- Microcontroller system
- Electronics installed in the vehicle
- Network equipment
- Electric heating appliances
- DC stabilized power supply module
- Automotive power systems
- Medical-specific insulation monitor
- WiFi router
