TPS3307-18MDREP
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS3307 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Max Supply Current | 40μA |
| Adjustable Threshold | YES |
| Quiescent Current | 15μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 1.68V 2.93V Adj |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | +1.251.682.93 |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 1.29V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
TPS3307-18MDREP Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. A Tape & Reel (TR) package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 3 channels, each of which can be used independently. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts in a 3.3V-voltage supply. Power ics operate at 3 supply voltages. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 8 pins in it. There are 8 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2V, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -55°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a supply current of 15μA for the power management. As well as this, there are other features to mention such as [0], for example. It is always advisable to use TPS3307, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature that PMIC chip can work with is 40μA.
TPS3307-18MDREP Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
15μA operating supply current
TPS3307-18MDREP Applications
There are a lot of Texas Instruments TPS3307-18MDREP Voltage Supervisors applications.
- Medical-specific insulation monitor
- Dash board
- Network equipment
- Low voltage/high power - AI, GPU
- WiFi router
- Detection of phase sequence
- Military communications
- External alarm
- Automotive permanent magnet synchronous motors
- Precision measurement
