TPS3307-25D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Current Rating | 40A |
| Base Part Number | TPS3307 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Output Voltage | 2.93V |
| Number of Channels | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 725mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | YES |
| Quiescent Current | 15μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.25V 2.93V Adj |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | +1.252.252.93V |
| Undervoltage Threshold | 2.93V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3307-25D Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. It is packaged with Tube. Please refer to this PMIC for 1 functions. There are 3 channels on this power managment ic that can be found in a series. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. IC management conducts at a voltage of 3.3V. IC management conducts in a 3-voltage supply. The power management system can be categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 8. Power managment ic pin count is 8. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 2V volts. There should be no more than 6V volts of supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 15μA volt supply current. A similar IC managements number of the manufacturer can always be found by using TPS3307, the base power ics number. At most, voltage supervisor can operate at a supply temperature of 40μA. 40A currents are rated for the IC management.
TPS3307-25D Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
15μA operating supply current
Current rating of 40A
TPS3307-25D Applications
There are a lot of Texas Instruments TPS3307-25D Voltage Supervisors applications.
- Battery-powered equipment
- Insulation fault location system
- Digitally controlled LDO regulators circuit
- Detection of phase imbalance
- Radar
- Microprocessor system
- FPGA design
- Microcontroller system
- Sensitive sensors
- Automotive power systems
