TPS3307-25DGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3307 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 2.14W |
| Max Supply Current | 40μA |
| Adjustable Threshold | YES |
| Quiescent Current | 15μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.25V 2.93V Adj |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | +1.252.252.93V |
| Undervoltage Threshold | 2.93V |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3307-25DGN Overview
A total of 8 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tube. Please refer to this PMIC for 1 functions. This power management is made up of 3 channels which are available in a series format. For your reference, this PMIC includes a list of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad functions. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 3.3V is used to conduct the PMIC chip. When a supply voltage of 3 is applied to the power ic, it conducts. This power ic can be sub-categorized as Power Management Circuits. 8 pins are present in total in this power management. 8 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2V, which is the minimum supply voltage that should be applied. There should be no more than 6V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. You can always use TPS3307, the base supervisor number, to search for similar PMICs of the manufacturer. At the most, voltage supervisor can work with a supply temperature of 40μA.
TPS3307-25DGN Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
15μA operating supply current
TPS3307-25DGN Applications
There are a lot of Texas Instruments TPS3307-25DGN Voltage Supervisors applications.
- Power distribution systems of operating room
- Microcontroller system
- Power distribution systems of infant care room
- Military electronics
- Medical-specific isolation transformer
- Precision measurement
- Utility meter
- Power distribution systems of CCU
- Multi-voltage system
- Efficient information transmission
