TPS3307-33D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.55V; MANUAL RESET INPUT; POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS3307 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 725mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | YES |
| Quiescent Current | 15μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.93V 4.55V Adj |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | +1.252.934.55V |
| Undervoltage Threshold | 4.55V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3307-33D Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaged in a Tube-shape, IC management comes with a number of features. As a reference, this IC management includes 1 functions for your convenience. Power management consists of 3 channels, each of which can be used independently. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. As specified in the package specification, the peak reflow temperature of the package is set at 260. The supervisor is always powered by a 3.3V volt supply. When a supply voltage of 3 is applied to the power ic, it conducts. There is a subcategory called Power Management Circuits for this power management. In total, the power management has 8 pins in it. 8 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2V. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a 15μA supply current present in the power management. Power management is also possible to add other features such as RESET THRESHOLD VOLTAGE IS 4.55V; MANUAL RESET INPUT; POWER-ON RESET GENERATOR to name a few. You can always use TPS3307, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 40μA can be used with this power management.
TPS3307-33D Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
15μA operating supply current
TPS3307-33D Applications
There are a lot of Texas Instruments TPS3307-33D Voltage Supervisors applications.
- Smartphones
- Insulation fault location system
- Urban rail transit weak current power monitoring
- Medical-specific insulation monitor
- Leakage current detection
- Digitally controlled LDO regulators circuit
- Cloud computing
- Analog circuit
- Electrical fire monitoring system
- Important electronics for automotive protection
