TPS3307-33DGNRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.55V; MANUAL RESET INPUT; POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 2.14W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3307 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 2.14W |
| Max Supply Current | 40μA |
| Adjustable Threshold | YES |
| Quiescent Current | 15μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.93V 4.55V Adj |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | +1.252.934.55V |
| Undervoltage Threshold | 4.55V |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3307-33DGNRG4 Overview
This power management consists of 8 mounting terminals on which it can be mounted. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 3 channels, each of which can be used independently. For your reference, this PMIC includes a list of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad functions. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3.3V volt supply. When a supply voltage of 3 is applied to the power ic, it conducts. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 8 pins that are attached to IC management. 8 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The power management's supply current is 15μA. The other features include, for example, [0], which is just one example. To find similar IC managements from the manufacturer, you can always search by TPS3307. At most, voltage supervisor can operate at a supply temperature of 40μA.
TPS3307-33DGNRG4 Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
15μA operating supply current
TPS3307-33DGNRG4 Applications
There are a lot of Texas Instruments TPS3307-33DGNRG4 Voltage Supervisors applications.
- Military electronics
- Smartphones
- Telecommunications equipment
- Detection of phase imbalance
- Solar power charger
- Power distribution systems of CCU
- Low voltage/high power - AI, GPU
- Urban rail transit weak current power monitoring
- Automotive power systems
- Precision measurement
