TPS3307-33DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.55V; MANUAL RESET INPUT; POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 725mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS3307 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 725mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | YES |
| Quiescent Current | 15μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.93V 4.55V Adj |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | +1.252.934.55V |
| Undervoltage Threshold | 4.55V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3307-33DR Overview
A total of 8 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 3 channels. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. When 3.3V is applied to the power ic, it conducts. There is a voltage supply of 3 for the PMIC chip, and the chip conducts at that voltage. A IC power such as this can be classified as a Power Management Circuits power management system. 8 pins are present in total in this power management. This power management system has 8 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 2V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The power management's supply current is 15μA. There are also other features in the software such as [0], just to mention a few. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3307, which is the base power ics number. Voltage supervisor can work with a supply temperature of 40μA at the most.
TPS3307-33DR Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
15μA operating supply current
TPS3307-33DR Applications
There are a lot of Texas Instruments TPS3307-33DR Voltage Supervisors applications.
- Battery cars
- Satellite navigation
- Microcontroller system
- Linux and server computing
- Efficient information transmission
- Automotive power systems
- Unattended substation automation
- Dash board
- Power distribution systems of CCU
- Leakage protection
