Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Multi-Voltage Supervisor |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
RESET THRESHOLD VOLTAGE IS 4.55V; MANUAL RESET INPUT; POWER-ON RESET GENERATOR |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
725mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
1.27mm |
Base Part Number |
TPS3307 |
Output |
Push-Pull, Totem Pole |
Pin Count |
8 |
Number of Channels |
3 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Operating Supply Current |
15μA |
Nominal Supply Current |
40μA |
Power Dissipation |
725mW |
Max Supply Current |
40μA |
Adjustable Threshold |
YES |
Quiescent Current |
15μA |
Watchdog Timer |
No |
Reset |
Active High/Active Low |
Voltage - Threshold |
2.93V 4.55V Adj |
Number of Voltages Monitored |
3 |
Reset Timeout |
140ms Minimum |
Threshold Voltage |
+1.252.934.55V |
Undervoltage Threshold |
4.55V |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS3307-33DRG4 Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. As a reference, this IC management includes 1 functions for your convenience. A series of 3 channels can be found on this supervisor. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. During the reflow process, a peak temperature of 260 is specified for the package. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. IC management is possible to find a succession of 3 voltages that have been checked. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 8 pins on power management. This power management has 8 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2V. The supply voltage (Vsup) should not exceed 6V volts in this IC power. The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 15μA is the recommended value. There are other features such as RESET THRESHOLD VOLTAGE IS 4.55V; MANUAL RESET INPUT; POWER-ON RESET GENERATOR to name a few. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3307, which is the base power ics number. At the most, voltage supervisor can work with a supply temperature of 40μA.
TPS3307-33DRG4 Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
15μA operating supply current
TPS3307-33DRG4 Applications
There are a lot of Texas Instruments TPS3307-33DRG4 Voltage Supervisors applications.
- Smartphones
- Automotive permanent magnet synchronous motors
- Power distribution systems of CCU
- Leakage current detection
- Computer applications
- Battery cars
- Battery cars
- Digitally controlled LDO regulators circuit
- Set top box
- Important electronics for automotive protection