TPS3307-33MDGNREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3307 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 40μA |
| Max Supply Current | 40μA |
| Adjustable Threshold | YES |
| Quiescent Current | 15μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.93V 4.55V Adj |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 140ms Minimum |
| Threshold Voltage | +1.252.934.55V |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 1.29V |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3307-33MDGNREP Overview
It is mounted through 8 terminals on the power management. Tape & Reel (TR)-packaging is used. Please refer to this PMIC for 1 functions. There are 3 channels on this power managment ic that can be found in a series. IC management is packaged as a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. In a 3.3V supply voltage, the power management conducts. In a 3 supply voltage, the PMIC chip conducts. There is a subcategory called Power Management Circuits for this power management. Power management has a total of 8 pins. 8 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 2V volts. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -55°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a 15μA supply current present in the power management. In addition, IC management are other features such as [0], to mention only a few. To find similar IC managements from the manufacturer, you can always search by TPS3307. A maximum supply temperature of 40μA can be used with this power management.
TPS3307-33MDGNREP Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
15μA operating supply current
TPS3307-33MDGNREP Applications
There are a lot of Texas Instruments TPS3307-33MDGNREP Voltage Supervisors applications.
- Dash board
- Utility meter
- Electrical fire monitoring system
- Power distribution systems of CCU
- Computer applications
- Solar power charger
- Automotive permanent magnet synchronous motors
- Important electronics for automotive protection
- Cloud computing
- Household appliances
