TPS3510D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 730mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS3510 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Number of Channels | 3 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1mA |
| Power Dissipation | 730mW |
| Max Supply Current | 1mA |
| Adjustable Threshold | NO |
| Quiescent Current | 1mA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.3V 5V 12V |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 200ms Minimum |
| Min Reset Threshold Voltage | 2.2V |
| Max Reset Threshold Voltage | 13.8V |
| Threshold Voltage | 2.2 |
| Undervoltage Threshold | 3.5V |
| Overvoltage Threshold | 13.8V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3510D Overview
There are 8 terminals on this power management that allow it to be mounted. It is packaged with Tube. In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 3 channels. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. Packages are specified to have an average peak reflow temperature of 260. The supervisor is always powered by a 5V volt supply. In a 3 supply voltage, the PMIC chip conducts. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 8 pins on power management. 8 pins are on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 4V. The maximum supply voltage (Vsup) in this PMIC should not exceed 15V volts. A Surface Mount mounting type is recommended. You should set the supervisor's temperature during -40°C~85°C TA . The output voltage of this power managment ic during operation is Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 1mA. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3510, which is the base power ics number. A maximum supply temperature of 1mA can be used.
TPS3510D Features
Multi-Voltage Supervisor type
Minimum supply voltage of 4V
1mA operating supply current
TPS3510D Applications
There are a lot of Texas Instruments TPS3510D Voltage Supervisors applications.
- Detection of phase imbalance
- Set top box
- Magnetic resonance imaging
- Rechargeable batteries
- Display equipment
- Smart meter
- Radio
- Power distribution systems of infant care room
- Data storage applications
- WiFi router
