banner_page

TPS3510P

5V8 Terminals 8-Pin TPS3510 Voltage supervisor3 Channels Min 4V Max 15V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS3510P
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 931
  • Description: 5V8 Terminals 8-Pin TPS3510 Voltage supervisor3 Channels Min 4V Max 15V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Multi-Voltage Supervisor
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Power Management Circuits
Max Power Dissipation 1.092W
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Base Part Number TPS3510
Output Open Drain or Open Collector
Pin Count 8
Number of Channels 3
Max Supply Voltage 15V
Min Supply Voltage 4V
Operating Supply Current 1mA
Power Dissipation 1.092W
Max Supply Current 1mA
Adjustable Threshold NO
Quiescent Current 1mA
Watchdog Timer No
Reset Active Low
Voltage - Threshold 3.3V 5V 12V
Number of Voltages Monitored 3
Reset Timeout 200ms Minimum
Min Reset Threshold Voltage 2.2V
Max Reset Threshold Voltage 13.8V
Threshold Voltage 2.2
Undervoltage Threshold 3.5V
Overvoltage Threshold 13.8V
Height 5.08mm
Length 9.81mm
Width 6.35mm
Thickness 3.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS3510P Overview


As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Packaging is in the form of a Tube. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 3 channels. For your reference, this PMIC includes a list of 8-DIP (0.300, 7.62mm) functions. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. When a supply voltage of 5V is applied to the power ic, it conducts. In a 3 supply voltage, the PMIC chip conducts. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, the power management has 8 pins in it. This power management has 8 pins. IC management can only work with a supply voltage of 4V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 15V volts. The recommended mounting type is Through Hole. This range of temperature should be set for the supervisors: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. There is a supply current of 1mA for the power management. It is always advisable to use TPS3510, the base supervisor number, when searching for similar PMICs from the manufacturer. Voltage supervisor can work with a supply temperature of 1mA at the most.

TPS3510P Features


Multi-Voltage Supervisor type
Minimum supply voltage of 4V
1mA operating supply current

TPS3510P Applications


There are a lot of Texas Instruments TPS3510P Voltage Supervisors applications.

  • Household appliances
  • Power distribution systems of operating room
  • Data storage applications
  • Military electronics
  • Electronics installed in the vehicle
  • Dash board
  • Leakage protection
  • Radio
  • Smartphones
  • Set top box

Write a review

Note: HTML is not translated!
    Bad           Good