TPS3511DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 730mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS3511 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Number of Channels | 3 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 1mA |
| Power Dissipation | 730mW |
| Max Supply Current | 1mA |
| Adjustable Threshold | NO |
| Quiescent Current | 1mA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.3V 5V 12V |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 100ms Minimum |
| Threshold Voltage | 2.2 |
| Undervoltage Threshold | 3.5V |
| Overvoltage Threshold | 13.8V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3511DR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. There are 3 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 5V is used to conduct the PMIC chip. When a supply voltage of 3 is applied to the power ic, it conducts. There is a subcategory of this power ic known as Power Management Circuits. In total, the power management has 8 pins in it. There are 8 pins on the supervisor. Supply voltage (Vsup) should be at least 4V for this power management. The maximum supply voltage (Vsup) is not to exceed 15V volts in this IC management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The supervisor's supply current is specified to 1mA. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3511, which is the base power ics number. Voltage supervisor can work with a supply temperature of 1mA at the most.
TPS3511DR Features
Multi-Voltage Supervisor type
Minimum supply voltage of 4V
1mA operating supply current
TPS3511DR Applications
There are a lot of Texas Instruments TPS3511DR Voltage Supervisors applications.
- Rechargeable batteries
- Functional modules
- Display equipment
- Detection of phase imbalance
- Embedded computing
- Smartphones
- Detection of phase sequence
- Computer applications
- Multi-voltage system
- Battery-powered equipment
