TPS3511P
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.092W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TPS3511 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Number of Channels | 3 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 1mA |
| Power Dissipation | 1.092W |
| Max Supply Current | 1mA |
| Adjustable Threshold | NO |
| Quiescent Current | 1mA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.3V 5V 12V |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 100ms Minimum |
| Undervoltage Threshold | 3.5V |
| Overvoltage Threshold | 13.8V |
| Width | 7.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS3511P Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in a Tube-shape, IC management comes with a number of features. Please refer to this PMIC for 1 functions. Power management consists of 3 channels, each of which can be used independently. IC management is packaged as a 8-DIP (0.300, 7.62mm) package. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. When 5V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 3. There is a subcategory called Power Management Circuits for this power management. It has a total of 8 pins that are attached to IC management. 8 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 4V. There should be no more than 15V volts of maximum supply voltage (Vsup) in this power management. Through Hole is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 1mA is the recommended value. It is always advisable to use TPS3511, the base supervisor number, when searching for similar PMICs from the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1mA.
TPS3511P Features
Multi-Voltage Supervisor type
Minimum supply voltage of 4V
1mA operating supply current
TPS3511P Applications
There are a lot of Texas Instruments TPS3511P Voltage Supervisors applications.
- Microprocessor system
- Precision measurement
- Military communications
- DVR
- Leakage current detection
- Network equipment
- Analog circuit
- Smartphones
- Microcontroller system
- WiFi router
