TPS3513N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.512W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TPS3513 |
| Output | Open Drain or Open Collector |
| Pin Count | 14 |
| Max Output Current | 20mA |
| Number of Channels | 3 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1mA |
| Power Dissipation | 1.512W |
| Max Supply Current | 1mA |
| Adjustable Threshold | NO |
| Quiescent Current | 1mA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.3V 5V 12V |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 200ms Minimum |
| Threshold Voltage | 2.2 |
| Undervoltage Threshold | 9V |
| Overvoltage Threshold | 13.8V |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3513N Overview
There are 14 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tube. In this IC power you will find 1 functions for you to refer to. There are a total of 3 channels on this supervisor, and they are arranged in a series. For your reference, this PMIC includes a list of 14-DIP (0.300, 7.62mm) functions. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. During operation, the power ic is supplied with a voltage of 5V. IC management is possible to find a succession of 3 voltages that have been checked. The power management system can be categorized as a Power Management Circuits chip. In total, the power management has 14 pins in it. There are 14 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 4.5V for this PMIC. During this IC power, the maximum supply voltage (Vsup) should not exceed 15V volts. Through Hole mounting is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 1mA. To find similar IC managements from the manufacturer, you can always search by TPS3513. At most, voltage supervisor can operate at a supply temperature of 1mA.
TPS3513N Features
Multi-Voltage Supervisor type
Minimum supply voltage of 4.5V
1mA operating supply current
TPS3513N Applications
There are a lot of Texas Instruments TPS3513N Voltage Supervisors applications.
- Important electronics for automotive safety
- Solar power charger
- Efficient information transmission
- Microcontroller system
- Fire equipment power monitoring system
- Telecommunications equipment
- Household appliances
- Rechargeable batteries
- Automotive permanent magnet synchronous motors
- emergency room
