TPS3514N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.512W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TPS3514 |
| Output | Open Drain or Open Collector |
| Pin Count | 14 |
| Max Output Current | 20mA |
| Number of Channels | 3 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1mA |
| Power Dissipation | 1.512W |
| Max Supply Current | 1mA |
| Adjustable Threshold | YES |
| Quiescent Current | 1mA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.3V 5V 12V |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 200ms Minimum |
| Threshold Voltage | 2.2 |
| Undervoltage Threshold | 9V |
| Overvoltage Threshold | 13.8V |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3514N Overview
This voltage supervisor has a total of 14 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tube model. In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 3 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 14-DIP (0.300, 7.62mm) functions. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. IC management conducts at a voltage of 5V. In a 3 supply voltage, the PMIC chip conducts. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. A total of 14 pins are located on this power management. The pins of the power management system count 14. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 4.5V. The maximum supply voltage (Vsup) is not to exceed 15V volts in this IC management. Through Hole mounting is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The supervisor's supply current is specified to 1mA. A similar IC managements number of the manufacturer can always be found by using TPS3514, the base power ics number. A maximum supply temperature of 1mA can be used.
TPS3514N Features
Multi-Voltage Supervisor type
Minimum supply voltage of 4.5V
1mA operating supply current
TPS3514N Applications
There are a lot of Texas Instruments TPS3514N Voltage Supervisors applications.
- Radio
- Unattended substation automation
- WiFi router
- Efficient information transmission
- Urban rail transit weak current power monitoring
- Electronics installed in the vehicle
- Battery-powered equipment
- Network equipment
- Refrigeration
- Power distribution systems of infant care room
