TPS3600D20PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 700mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Base Part Number | TPS3600D20 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 14 |
| Operating Supply Voltage | 2V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 700mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 20μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 60ms Minimum |
| Min Reset Threshold Voltage | 1.74V |
| Max Reset Threshold Voltage | 1.82V |
| Threshold Voltage | 1.78 |
| Undervoltage Threshold | 1.78V |
| Overvoltage Threshold | 1.82V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3600D20PW Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 14 in total. There is a Tube-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. As a reference, this IC power includes 14-TSSOP (0.173, 4.40mm Width) functions for your convenience. There are a lot of similarities between this IC power and other Battery Backup Circuit products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 2V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 14. Pin count of the power management is 14. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.65V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 20μA is the recommended value. You can always use TPS3600D20, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 40μA can be used with this power management.
TPS3600D20PW Features
Battery Backup Circuit type
Minimum supply voltage of 1.65V
20μA operating supply current
TPS3600D20PW Applications
There are a lot of Texas Instruments TPS3600D20PW Voltage Supervisors applications.
- DSP
- Detection of phase loss
- Automotive permanent magnet synchronous motors
- Leakage current detection
- Military electronics
- Microprocessor system
- Leakage protection
- Satellite navigation
- Embedded computing
- Microcontroller system
