TPS3600D20PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 700mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Base Part Number | TPS3600D20 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 14 |
| Operating Supply Voltage | 2V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 700mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 20μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 60ms Minimum |
| Min Reset Threshold Voltage | 1.74V |
| Max Reset Threshold Voltage | 1.82V |
| Threshold Voltage | 1.78 |
| Undervoltage Threshold | 1.78V |
| Overvoltage Threshold | 1.82V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3600D20PWR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 14 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of 14-TSSOP (0.173, 4.40mm Width) functions. There are a lot of similarities between this IC management and other Battery Backup Circuit products. As specified in the package specification, the peak reflow temperature of the package is set at 260. There is a voltage supply of 2V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, it has 14 pins on IC management. This power management has 14 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.65V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. In order to maintain a stable supply current for the power management, 20μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using TPS3600D20, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 40μA.
TPS3600D20PWR Features
Battery Backup Circuit type
Minimum supply voltage of 1.65V
20μA operating supply current
TPS3600D20PWR Applications
There are a lot of Texas Instruments TPS3600D20PWR Voltage Supervisors applications.
- Battery cars
- Automotive power systems
- Leakage protection
- Network equipment
- Linux and server computing
- Sensitive sensors
- Radar
- Telecommunications equipment
- Electric heating appliances
- Display equipment
