TPS3600D25PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.22V; MANUAL RESET, POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 700mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | TPS3600D25 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 14 |
| Operating Supply Voltage | 2.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 700mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 20μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 60ms Minimum |
| Min Reset Threshold Voltage | 2.17V |
| Max Reset Threshold Voltage | 2.27V |
| Threshold Voltage | 2.22 |
| Undervoltage Threshold | 2.22V |
| Overvoltage Threshold | 2.27V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3600D25PW Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 14 in total. Packaging is in the form of a Tube. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. Please find attached 14-TSSOP (0.173, 4.40mm Width) functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. The package peak reflow temperature is specified to be 260. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. IC management conducts in a 1-voltage supply. This power ic can be sub-categorized as Power Management Circuits. 14 pins are present in total in this power management. This power management has 14 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.65V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. A Surface Mount mounting type is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 20μA volt supply current. Power management is also possible to add other features such as RESET THRESHOLD VOLTAGE IS 2.22V; MANUAL RESET, POWER-ON RESET GENERATOR to name a few. For similar manage ics search of the manufacturer, you can always refer to TPS3600D25, the base PMIC number. At most, voltage supervisor can operate at a supply temperature of 40μA.
TPS3600D25PW Features
Battery Backup Circuit type
Minimum supply voltage of 1.65V
20μA operating supply current
TPS3600D25PW Applications
There are a lot of Texas Instruments TPS3600D25PW Voltage Supervisors applications.
- Transformer load monitoring equipment
- Smartphones
- Efficient information transmission
- Automotive permanent magnet synchronous motors
- Functional modules
- Important electronics for automotive protection
- Urban rail transit weak current power monitoring
- Sensitive sensors
- Consumer electronics
- DVR
