TPS3600D25PWR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.22V; MANUAL RESET, POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 700mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3600D25 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 14 |
| Operating Supply Voltage | 2.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 700mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 20μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 60ms Minimum |
| Min Reset Threshold Voltage | 2.17V |
| Max Reset Threshold Voltage | 2.27V |
| Undervoltage Threshold | 2.22V |
| Overvoltage Threshold | 2.27V |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS3600D25PWR Overview
This voltage supervisor has a total of 14 mounting terminals that can be used for mounting. Packaging is in the form of a Tape & Reel (TR). To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. There are 14-TSSOP (0.173, 4.40mm Width) functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 2.5V supply voltages. IC management conducts in a 1-voltage supply. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, it has 14 pins on IC management. Pin count of the power management is 14. IC management can only work with a supply voltage of 1.65V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. As far as the supply current of the power management is concerned, it is 20μA. There are other features such as RESET THRESHOLD VOLTAGE IS 2.22V; MANUAL RESET, POWER-ON RESET GENERATOR to name a few. To find similar IC managements from the manufacturer, you can always search by TPS3600D25. At most, voltage supervisor can operate at a supply temperature of 40μA.
TPS3600D25PWR Features
Battery Backup Circuit type
Minimum supply voltage of 1.65V
20μA operating supply current
TPS3600D25PWR Applications
There are a lot of Texas Instruments TPS3600D25PWR Voltage Supervisors applications.
- Multi-voltage system
- External alarm
- Important electronics for automotive protection
- Smartphones
- Military communications
- Stable power system
- Consumer electronics
- Insulation fault location system
- Display equipment
- Data storage applications
