Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
Battery Backup Circuit |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
RESET THRESHOLD VOLTAGE IS 2.93V; MANUAL RESET, POWER-ON RESET GENERATOR |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
700mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
TPS3600D33 |
Output |
Push-Pull, Totem Pole |
Pin Count |
14 |
Operating Supply Voltage |
3.3V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.65V |
Operating Supply Current |
20μA |
Nominal Supply Current |
40μA |
Power Dissipation |
700mW |
Max Supply Current |
40μA |
Adjustable Threshold |
NO |
Quiescent Current |
20μA |
Watchdog Timer |
Yes |
Reset |
Active Low |
Number of Voltages Monitored |
1 |
Reset Timeout |
60ms Minimum |
Min Reset Threshold Voltage |
2.87V |
Max Reset Threshold Voltage |
2.99V |
Threshold Voltage |
2.93 |
Undervoltage Threshold |
2.93V |
Overvoltage Threshold |
2.99V |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS3600D33PWRG4 Overview
There are 14 terminals connected to this power management, which makes it easy to mount. A Tape & Reel (TR) package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of 14-TSSOP (0.173, 4.40mm Width) functions. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. The package peak reflow temperature is specified to be 260. The supervisor is always powered by a 3.3V volt supply. IC management conducts in a 1-voltage supply. A IC power such as this can be classified as a Power Management Circuits power management system. The total number of pins on this power management is 14. This power management has 14 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.65V, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 20μA is the recommended value. Additionally, there are many other features that can be found inside of the power management, such as [0]. A similar IC managements number of the manufacturer can always be found by using TPS3600D33, the base power ics number. The maximum supply temperature voltage supervisor can handle is 40μA.
TPS3600D33PWRG4 Features
Battery Backup Circuit type
Minimum supply voltage of 1.65V
20μA operating supply current
TPS3600D33PWRG4 Applications
There are a lot of Texas Instruments TPS3600D33PWRG4 Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Insulation fault location system
- Efficient information transmission
- External alarm
- Embedded computing
- Battery cars
- Transformer load monitoring equipment
- Display equipment
- Magnetic resonance imaging
- Automotive power systems