TPS3600D50PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 700mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS3600D50 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 700mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 20μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 60ms Minimum |
| Min Reset Threshold Voltage | 4.31V |
| Max Reset Threshold Voltage | 4.49V |
| Threshold Voltage | 4.4 |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 4.49V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3600D50PW Overview
There are 14 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in a Tube-shape, IC management comes with a number of features. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. In this IC management you will find 14-TSSOP (0.173, 4.40mm Width) functions for you to refer to. This IC power shares lots of benefits with other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 5V. When a supply voltage of 1 is applied to the power ic, it conducts. The power management system can be categorized as a Power Management Circuits chip. In total, IC powers are 14 pins on the board. Pin count of the power management is 14. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.65V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The power management's supply current is 20μA. It is always advisable to use TPS3600D50, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature voltage supervisor can handle is 40μA.
TPS3600D50PW Features
Battery Backup Circuit type
Minimum supply voltage of 1.65V
20μA operating supply current
TPS3600D50PW Applications
There are a lot of Texas Instruments TPS3600D50PW Voltage Supervisors applications.
- Automotive power systems
- Dash board
- Military communications
- Medical-specific insulation monitor
- Microprocessor system
- Battery cars
- Leakage protection
- Embedded computing
- DVR
- Utility meter
